What Is Arbor Size On A Circular Saw – You Should Follow These Guidelines

Arbor size on a circular saw is the measurement of the diameter of the hole in the center of the blade. It is important to know the arbor size when purchasing a new blade, as different sizes are not compatible with all saws. The most common arbor sizes are 5/8 inch and 1 inch, but there are other sizes available as well.

If you are unsure about what is arbor size on a circular saw? Let’s go with me in this blog I’ll tell you which is the best size for your circular saw.

What is Arbor Size on a Circular Saw

An arbor is a shaft on a power tool that a blade or other attachment is mounted on. The term “arbor size” refers to the diameter of the arbor. For example, a saw with a 5/8-inch arbor can use blades with that same 5/8-inch mounting hole.

Arbor sizes for circular saws typically range from 5/8 to 1 inch. The most common size is 7/8 inches. Some saws have an adjustable arbor, which means they can use blades of different sizes.

The benefits of using a circular saw with the correct sized arbor include

  • Blades are less likely to come loose and fly off during operation.
  • Blades will fit more snugly and tightly, reducing vibration.
  • There’s less chance of damage to the blade or motor due to improper fitting.

What is Standard Arbor?

A standard arbor is a type of arbor that is commonly used in many different applications. The most common use for a standard arbor is to provide support for a rotating cutting tool, such as a drill bit or end mill. Standard arbors are also often used to hold workpieces in place while they are being machined.

There are many different sizes and styles of standard arbors available, so it is important to select the right one for the application at hand.

When selecting a standard arbor, it is important to consider the following factors:

  • The size of the cutting tool that will be used with the arbor.
  • The speed at which the cutting tool will be rotated.
  • The material will be machined with the cutting tool.
  • The accuracy and precision required for the machining operation.

Is Bore the Same As Arbor?

In short, no. A bore is a hole that has been drilled, reamed, or milled out of a solid material. An arbor is a shaft that supports a rotating element like a wheel or cutting tool.

Bores are found in many different types of objects from firearms to engines while arbors are most often used in machining applications.

What Does Bore Size Mean on Circular Saw?

When it comes to circular saws, the bore size refers to the diameter of the central arbor. This is an important measurement to take into account when purchasing a new saw, as it will dictate which size and type of blades you can use with the tool. A larger bore size means that you can use larger blades, while a smaller bore size limits you to smaller blades.

What Size Arbor are Most Table Saws?

Table saws typically have an arbor that is 5/8 to 1 inch in diameter. Most table saws have an arbor that is 3/4 inches in diameter.

Circular Saw Arbor Adaptor

Circular Saw Arbor Adaptor

A circular saw arbor adapter is a device that is used to connect a circular saw blade to an arbor. The adapter consists of two parts: the body and the nut. The body of the adapter fits over the arbor of the saw, and the nut is threaded onto the body.

The purpose of the adapter is to allow for different sizes of circular saw blades to be used with an arbor. There are two main types of adapters: those that fit over an existing arbor, and those that replace an existing arbor. Adapters that fit over an existing arbor are typically used when switching from one size blade to another.

For example, if you have a 7-1/4″ blade on your saw and want to use a 10″ blade, you would need an adapter that fits over your 7-1/4″ arbor. Adapters that replace an existing arbor are typically used when going from a larger blade size to a smaller one. For example, if you have a 10″ blade on your saw and want to use a 7-1/4″ blade, you would need an adapter that replaces your 10″ arbor. The most important thing to keep in mind when using an adapter is making sure that the teeth on the new blade align with those on the old one.

How to Measure Arbor Size

Arbor size refers to the distance between the blades of a saw. It is important to know the arbor size of your saw before purchasing or changing blades, as different sizes are not compatible with each other. There are two ways to measure arbor size:

1. Use a ruler or tape measure to find the distance between the centers of the two blade mounting holes. This will give you the outside diameter (OD) of the arbor.

2. Alternatively, you can remove one of the saw blades and measure the inside diameter (ID) of the arbor hole with a caliper. Knowing your arbor size is essential for keeping your saw in good working condition and purchasing the right replacement parts.


Table Saw Arbor Size

Table saw arbor sizes can vary depending on the model and make of the saw. In general, most table saws will have either a 5/8-inch or 3/4-inch arbor. The size of the arbor will determine the maximum width of the blade that can be used with that particular saw.

For example, a 5/8-inch arbor will accommodate blades up to 4 inches wide, while a 3/4-inch arbor can accommodate blades up to 6 inches wide. When choosing a blade for your table saw, it is important to select one that is compatible with the size of your arbor. Using a blade that is too large for your arbor can damage your saw and potentially cause serious injury.

Conversely, using a blade that is too small for your arbor can result in poor cutting performance and increased wear on the motor and bearings.

Saw Blade Teeth Guide

If you’re in the market for a new saw blade, it’s important to choose one with the right type of teeth for the job at hand. This guide will help you understand the different types of saw blade teeth and how they can be used. There are three main types of saw blade teeth: rip, crosscut, and Combination.

Rip blades have large, sharp teeth that are spaced far apart. They’re designed for cutting along the grain of wood, making them ideal for rip cuts or long cuts in softwoods. Crosscut blades have smaller teeth that are spaced closer together.

They’re designed for cutting across the grain of wood and can be used for crosscuts, miters, and joinery cuts. Combination blades have a mix of large and small teeth that are spaced somewhere between rip and crosscut blades. These versatile blades can be used for both ripping and crosscutting applications.

When choosing a saw blade, always make sure to select one with carbide-tipped teeth. Carbide is an extremely hard material that stays sharper longer than steel or other metals. It’s also more resistant to heat buildup, which means your blade will last longer when cutting through tough materials like hardwoods or composites.

Miter Saw Arbor Size

When it comes to miter saws, the arbor size is one of the most important specs to pay attention to. The arbor is the shaft that holds the blade in place, and its size will determine what kind of blades you can use with your saw. Most miter saws have either a 5/8” or 1” arbor, but there are a few models out there with larger arbors (up to 2”).

The general rule of thumb is that you want to use the largest blade possible for your application. That being said, a larger blade will put more stress on the motor of your saw, so if you’re only going to be making occasional cuts then you might not need such a large blade. On the other hand, if you’re planning on doing a lot of cutting then it’s worth it to get a bigger blade because it will make your life a lot easier.

So, what’s the bottom line? If you’re unsure which size arbor to get, go with the 1” model. It’s always better to have too much power than not enough.

What is a Saw Arbor

A saw arbor is a shaft or spindle on which a circular saw blade is mounted. The arbor provides the necessary support for the blade and allows it to rotate at high speeds. It also helps to keep the blade in place while it is cutting through the material.

What is the Most Common Sizes

Blade SizeArbor Hole Size
7-1/4” to 10”5/8”
12” to 16”1”
Worm drive sawsDiamond


Arbor size is the diameter of the spindle that the blade is mounted on. It is usually measured in inches. For most home workshop applications, a 5/8″ arbor is sufficient. However, for some specialty blades, such as dado blades, a 1″ arbor may be required.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top