What type of blade is used to cut brick

Angle Grinder Or Circular Saw For Cutting Pavers – Which Is Better For Cutting Pavers?

Angle Grinder Or Circular Saw For Cutting Pavers? There are a lot of different tools that can be used to cut pavers. Two of the most popular options are an angle grinder and a circular saw. Both of these tools have their own advantages and disadvantages, so it’s important to choose the right one for your specific project.

Here is a comparison of an angle grinder and a circular saw to help you decide which is better for cutting pavers.

Angle Grinder Or Circular Saw for Cutting Pavers

If you need to cut pavers, you might be wondering whether an angle grinder or a circular saw is the better option. Here’s a look at the pros and cons of each tool to help you make a decision:

Angle Grinders

Angle grinders are relatively inexpensive. Angle grinders can be challenging to use if you’re not experienced with them.
They’re easy to find and rent from most hardware stores.They create a lot of dust, so it’s important to wear a respirator when using one.
They’re small and lightweight, making them easy to maneuver.

Circular Saws

Circular saws are easier to use than angle grinders, making them a good choice for beginners. Circular saws can be more expensive than angle grinders.
Circular saws create less dust than angle grinders, so they’re better for your lungs.

Can I Use an Angle Grinder to Cut Pavers?

If you need to cut pavers, an angle grinder is a good tool to use. Just be sure to use the correct blade for the material you’re cutting. For example, if you’re cutting concrete pavers, you’ll need a masonry blade.

Masonry blades have abrasive segments that are bonded together with tough metal or carbide particles. This type of blade will quickly and easily cut through concrete pavers.

What is the Best Tool to Cut Pavers?

When it comes to cutting pavers, there are a few different tools that can be used. However, some tools are better than others. Here is a look at the best tool to cut pavers.

The best tool to cut pavers is a wet saw. A wet saw is a powerful tool that uses water to keep the blade cool while cutting. This type of saw will make clean cuts in pavers and will not create as much dust as other types of saws.

Another option for cutting pavers is an angle grinder. An angle grinder is a handheld power tool that has a rotating disc that can be used for grinding or cutting. While an angle grinder can be used to cut pavers, it does create more dust and can be more difficult to control than a wet saw.

If you are looking for a tool that is easy to use and will make clean cuts in pavers, then the best option is a wet saw.

What is the Best Way to Cut Pavers?

Cutting pavers can be done in a variety of ways, depending on the type of paver and the desired finish. For concrete pavers, the best way to cut them is with a masonry saw or an angle grinder fitted with a diamond blade. For brick pavers, the best way to cut them is with a power saw or chisel and hammer.

Can You Use a Circular Saw to Cut Concrete Pavers?

Angle Grinder Or Circular Saw for Cutting Pavers

When it comes to cutting concrete pavers, you have a few different options available to you. You can use a traditional circular saw with a blade specifically designed for cutting concrete, or you can opt for a wet saw, which will help to prevent dust from getting everywhere. If you’re working with thicker pavers, you may need to use a masonry chisel and hammer instead.

Here’s a quick rundown of how to cut concrete pavers using each method:

Circular saw: Set the depth of the blade on your circular saw so that it’s just barely touching the surface of the paper. Then, make your cut slowly and steadily, following the line that you’ve marked out ahead of time.

Be extra careful not to veer off course, as this could damage the paver. Wet saw: Start by soaking the paver in water for at least 15 minutes before beginning your cut. This will help to prevent the paver from drying out too quickly and cracking.

When you’re ready to start cutting, hold the wet paver firmly in place and make your cuts slowly and carefully. Again, be sure to follow any lines that you’ve drawn out beforehand. Masonry chisel and hammer: If you’re dealing with thicker pavers, this may be your best option.

First, score a line into the surface of the paver using a masonry chisel. Then, position the chisel on one side of the line and strike it with a hammer until it chips away at the paver (you may need to do this several times).

How to cut paving stones with an angle grinder (An easy DIY project – Part 2)

What Size Angle Grinder to Cut Pavers

When it comes to cutting pavers, the size of the angle grinder you use will depend on the size and thickness of the pavers. For example, if you are working with small, thin pavers, you can use a 4-inch or 5-inch angle grinder. However, if you are working with larger, thicker pavers, you will need to use a 7-inch or 9-inch angle grinder.

In addition, you will also need to choose the right blade for your angle grinder. For most applications, a diamond blade will work best.

Cutting Pavers With Circular Saw

One of the most common questions we get asked is “What is the best way to cut pavers?” There are a few different ways that you can do this, but our preferred method is using a circular saw. Here’s a step-by-step guide on how to properly cut pavers with a circular saw:

1. Mark your cutting line on the paver with chalk or a marker. Make sure that you have a straight line to follow.

2. Place the paver on a stable surface before beginning to cut. We recommend using a piece of plywood or something similar so that the paver doesn’t move around while you’re cutting it.

3. Set your circular saw to the depth that you need to make your cuts. For most pavers, this will be about 1 inch deep.

4. Slowly and carefully guide your saw along the marked line on the paver until you have made your cuts all the way through. Be extra careful not to veer off from your cutting line, as this could cause cracking or chipping of the pavers.

5. Use a chisel and hammer to clean up any rough edges from your cuts if necessary. And that’s it!

Best Wet Saw for Cutting Pavers

If you’re looking for the best-wet saw for cutting pavers, look no further than the Makita 4131. This powerful little saw is perfect for cutting through tough pavers with ease. It has a powerful 7.8 amp motor that can easily handle even the thickest pavers.

Plus, it comes with a built-in stand so you can keep it steady while you’re working. The Makita 4131 also comes with a diamond blade and an adjustable depth stop so you can always get a perfect cut.

How to Cut Pavers for Curves

When it comes to cutting pavers for curves, there are a few different methods you can use depending on the curve radius and the type of paver you’re using. For small curves with a radius of less than 18″, you can use a power saw or hand saw to make the cuts. For larger curves, you’ll need to use a wet saw.

To cut pavers for curves using a power saw, start by marking out the curve with string or chalk. Then, set your saw blade to the depth of the paver and make your cuts along the line. If necessary, finish up with a hammer and chisel to get clean edges.

If you’re using a wet saw, mark out your curve as before but then make shallow score cuts along the line with the blade before making deeper cuts. This will help prevent cracking and chipping when you make your final cuts. Finish up by making straight cuts along either side of the curve to remove any excess material.


If you’re working on a paving project, you may be wondering whether an angle grinder or a circular saw is the better tool for cutting pavers. Both have their advantages and disadvantages, so it really depends on the specific situation. Angle grinders are great for small jobs where precision isn’t as important.

They’re also easier to maneuver than circular saws. However, they can generate a lot of dust and heat, so they’re not ideal for large projects. Circular saws are more powerful than angle grinders and can handle larger jobs more easily.

They’re also less likely to overheat if used correctly. However, they can be difficult to control, so they’re not always the best choice for smaller projects.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top